Environmentally Responsible
Twenty Year Warranty
American Made
30 Years of Experience
- Key Benefits
- Information
- CAD Drawings
- Specifications
- Finish & Colors
- Brochures
Key Benefits
- RIGIDITY
- MODULAR SYSTEM
- LONGEVITY
- EASE OF INSTALLATION
- PANELS
- COATING
- TWINBAR vs. CHAINLINK
RIGIDITY
Highest rigidity and security available in wire mesh fence panels due to sophisticated double wire design.
MODULAR SYSTEM
The fence system is provided as a complete modular system consisting of panels in various heights, high strength steel posts and attachment hardware. A selection of swing, slide and cantilever gates are available.
LONGEVITY
METALCO’s advanced polyester powder coating system assures lasting colors. The combined protection of galvanization and powder coating ensures best protection against rust and corrossion.
EASE OF INSTALLATION
The TWINBAR system components are developed with ease of installation in mind. The system can be installed quickly and efficiently.
PANELS
The panels have a width of 8′-2 1/2″ (2500mm) and are available in heights ranging from 4ft to 8ft (1200 to 2400mm). The panels have 1 1/2″ pickets extending on one side and can be installed either with the pickets at top or at bottom. The mesh size is 2″x8″ (50x200mm) and consists of one vertical wire sandwiched between to horizontal wires. The forged welded high quality double wire design assures highest strength and rigidity.
COATING
The welded mesh panels are produced from galvanized steel wire and coated with an architectural grade polyester powder coating system. Our coating system offers the highest durability available today resulting in lasting colors for many years. In addition to the best protection against rust and corrosion it is also environmentally friendlier (no solvents) than other technologies.
Example: York Housing Authority, PA
The customer was faced with the task of continuously spending money and resources to repair the existing chainlink fence. The ongoing maintenance cost had become prohibitive. The customer decided to replace the existing chainlink fence with the TWINBAR Fence System. After the initial investment the of installing the maintenance free TWINBAR fence the eliminations of ongoing repair cost paid for the new fence in no time. Not to mention the major improvement to the overall aesthetics of the project.
Metalco TWINBAR is better than chain link fencing in every way!
BEFORE AFTER
Information
BREAK THE CHAINLINK HABIT WITH A TWINBAR FENCE SYSTEM FROM METALCO
The customer was faced with the task of continuously spending money and resources to repair the existing chainlink fence. The ongoing maintenance cost had become prohibitive. The customer decided to replace the existing chain link fence with the TWINBAR Fence System. After the initial investment the of installing the maintenance free TWINBAR fence the eliminations of ongoing repair cost paid for the new fence in no time. Not to mention the major improvement to the overall aesthetics of the project.
Make no mistake; chailink is neither secure nor vandal resistant. Its made of thin wire which can be cut with small wire snips. The low cost of the initial investment comes at a price and the aggravation and the cost of ongoing repairs. See the dramatic difference!
CAD DRAWINGS
TWINBAR Fence 4′-0″ tall
TWINBAR Fence 5′-0″ tall
TWINBAR Fence 6′-0″ tall
TWINBAR Fence 8′-0″ tall
TWINBAR Post/Panel Connection Detail
TWINBAR Fence 11ft tall with angled top
TWINBAR typical 6ft tall with Single Swing Walk Gate
TWINBAR typical Single Swing Gate
Specifications
Download Specifications
Word
“TWINBAR” Fence System Specifications
MFR offers technical assistance to architects, engineers, contractors, owners and facility managers regarding the design and installation of our products. We have provided many custom solutions for unusual situations. Let our experienced engineers assist you to determine the optimum design for your project.
MR-MANUFACTURER
MFR Manufacturing Corp, Inc., 1065 Sill Ave, Aurora, IL 60506
Tel: 815-318-0839, FAX 815-552-3315, e-mail: [email protected]
PP-PRODUCT PRESENTATION
Electro-forged welded steel fencing that is galvanized and powder polyester coated. The panels are made of an electro-forged wire mesh. The vertical rods are placed (sandwiched) between two horizontal rods. The rods are electro-forged welded at each crossing. The standard panel length is 8′-3″. The TWINBAR panels are available in different mesh sizes and different material strengths. The panels are prefabricated for heights from 2′ to 8′. Heights of more than 8′ are accomplished by combining panels with a different or equal height. Special panels for corners with different angles are available on request. The posts are made of square tubular steel of different sizes depending on the required overall height. The panels are mounted onto the front of the posts with pre-assembled mounting brackets or with a pre-assembled lock bar. All post-panel connections are utilizing a patented nylon setting to reduce rattling noise caused by wind, vibrations or other sources. The mesh size is designed according to code. A sphere of 4″ cannot pass through the openings.
TWINBAR ®
Mesh size 2″x 8″ (50x200mm) center Vertical rods are dia. 3/16″ (5mm), 2 Horizontal rods are
dia. 1/4″ (6mm). Panel Width and Post Spacing 8′-3″ (2510mm).
Fence Types and Height available:
|
Twinbar |
||
| Fence Height | No. of Panels and Heights | Post Size |
| 4′-0″ (1230) | 1 x 4′-0″ (1230) | 2″ x 2″ (51×51) |
| 4′-8″ (1430) | 1 x 4′-8″ (1430) | 2″ x 2″ (51×51) |
| 5′-3″ (1630) | 1 x 5′-3″ (1630) | 2″ x 2″ (51×51) |
| 6′-0″ (1830) | 1 x 6′-0″ (1830) | 2″ x 2″ (51×51) |
| 8′-0″ (2430) | 1 x 8′-0″ (2430) | 2″ x 2″ (51×51) |
| 10′-0″ (3060) | 1 x 6′ (1830) + 1 x 4′ (1230) | 3″ x 2″ (60×51) |
| 12′-0″ (3660) | 1 x 6′-0″ (1830) + 1 x 6′-0″ (1830) | 3″ x 2″ (60×51) |
| 14′-0″ (4260) | 1 x 8′ (2430) + 1 x 6′ (1830) | 4″ x 2″ (102×51) |
| 16′-0″ (4860) | 1 x 8′ (2430) + 1 x 8′ (2430) | 4″ x 2″ (102×51) |
( ) denotes metric
Security Options
Security options such as angled tops, barb wire attachments, electrifications and sensor wiring are avaiable on request.
AI-ASSEMBLY, INSTALLATION
Fence posts are of sufficient length to allow for setting into concrete footers. Posts with flanges (base plate) are also available. The fence post spacing is 8′-3″ (2510mm) apart on center. However, drawing will call out special spacing when required or to adjust for end pieces. In-ground posts may be set in concrete into hole 12″ (303mm) in diameter for terminal posts and 10″ (254mm) in diameter for intermediate posts. Concrete should be 6″ (152mm) deeper than posts. Deeper and wider settings may be necessary in some locations. It is recommended that the fence be temporarily erected using 2″x 4″ supports. After the fence is plumb and level, pour concrete grouting into holes. The panels are mounted onto the front of the posts with pre-assembled mounting brackets or with a pre-assembled lock bar. The panels simply snap into the bracket or lock bar. The brackets or lock bar bolts shall be tightened with ratchet and hex sockets or with a power tool and hex sockets. Corner can be made in the field by simply cutting the horizontal rod with a bolt cutter on one side of the panel. This allows the panel to be bent to any angle required.Installation of this fencing system is quick and easy.Posts can be attached to the structure below in several ways: Using the recessed method, posts are set into cored holes or sleeves and anchored with non-shrink grout. Using the surface mount method, mounting plates are attached to each post and bolted to the structure below utilizing expansion bolts or other fastening systems. Using the face mount method, the posts are mounted to the face of the structure typically below the level of the walking surface.
MF-MATERIALS, FINISHES
Thermosetting Polyester Powder Finish
MFR Fence and railing panels are protected by what we believe is the best finish available today. The computer controlled hot-dip galvanizing and the thermosetting polyester powder finish give the MFR System the highest possible protection against rust and corrosion. The advanced polyester powder coating technology is environmentally friendly (no solvents, lead free) and offers a large color selection.
Note: Due to do the nature of hot-dip galvanizing, the galvanized coating and powder coat can leave impurities on the treated surface, i.e., flashing, drips, drops, unevenness, roughness, pinholes etc. These do not impair the coating in terms of corrosion resistance and have no impact on the warranty. If a perfectly smooth surface is desired, non-galvanized powder coated only finish shall be specified.
In the interest of improving quality and design, MFR Manufacturing Corp, Inc. reserves the right to change specifications without prior notice.
Colors
One standard and two design colors are available: black, green, and gray. Additionally, we offer an almost unlimited selection of custom colors. The polyester powder coating is available for all our products including oversized parts, i.e. large gates.
20-Year Limited Warranty
MFR fencing systems are free from defects in material and workmanship.
The polyester-coated galvanized metal is guaranteed not to rust, crack, peel or blister for a period of 20 years. Accidental damages, defects resulting from improper installation and damage from vandalism or abuse are not included. Warranty is limited to prorated value of the coating, not to exceed the original value of the coating.
AC-AVAILABILITY, COST
Availability: MFR fencing is carried in stock in large mats or prefabricated panels. Jobs are fabricated and coated before being shipped throughout the United States.
Cost: Costs are quoted on a per-job basis due to varying requirements of each project. Costs may be obtained by calling:
Tel: 815-318-0839
FAX 815-552-3315
WEB SITE: www.mfrcorp.com
E-MAIL: [email protected]
OM-OPERATION, MAINTENANCE
The advanced coating method supplied on the MFR fencing systems requires no maintenance.
Finish. Colors. Coating.
The railing systems high rigidity is accomplished by use of combined steel bars which electro forged cross rods. Wide selection of a variety of different mesh sizes to match your project needs. All railing systems are designed to meet the strength requirements of standard building codes. Custom engineered systems can be designed to match any strength requirement for specific local building codes.(i.e. high rise roof top railings)
- Polyester Coating 90/100 micron
- Zinc base E-Coat layer and zinc rich powder layer / alternate hot dip galvanized zinc coating ASTM123
- High Strength Steel
*may vary by product type
Powder Coating is Eco Friendly
Our Powder Coatings are environmentally friendly and are an organic high quality finished surface providing integrity, durability, and a beautiful appearance over an extended period of time.
Powder Coating has been proven to be safer for the environment than wet paint applications. Most wet paints have solvents that are harmful to the environment. However, powder coat is solvent-free and applied electrostatically.
Ecologically there are no VOCs emitted and very little waste is produced because most powder coating overspray can be reused, greatly reducing the waste commonly found in liquid painting.
Environmental Impact of Powder Coating
Despite all the care that is taken to protect the environment, there are still benefits to be gained.
More importantly, the long term effect of powder coating the product for corrosion protection. Our coating system protects the metals which are exposed to the project conditions, which in turn enjoy a longer lifetime and require far less maintenance. Decay and early replacement of parts are prevented or at best minimized.
In the long run, powder coating will replace its counterpart, wet paint, in more and more areas. Technically, powder coating competes with wet paint head to head. In addition, powder coating is more friendly to the environment than wet paint, for the same cost, yet powder coating also has the advantage of superior mechanical and anti-corrosive properties. Whereas wet paint is all washed up!
Another advantage of using powder coatings is the subtraction of solvents. The powder is applied without any additives. The harmful emission of V.O.C., as used in wet paint, does not occur. The environment also benefits from the electrostatic adhesion of the metal to the powder particles. This adhesion creates a smooth and even layer that covers the edges of the metal object. This eliminates sharp edges that need to be ground into shape. The powder, not attracted to the substrate is contained and reused. Wet paint overspray has to be disposed of as chemical waste.
Brochures
Have our brochures mailed to you!
Download a PDF version of our brochure now.
PRODUCT Showcase
Organizations that use our products
